Installing the module, Installing the module -3 – Rockwell Automation 1746-HSCE2 Multi-Channel High Speed Counter Module User Manual

Page 43

Text mode
Original mode

Publication 1746-UM002B-EN-P - August 2004

Installation and Wiring 3-3

Figure 3.1 Jumper Settings

The 5V dc settings respond to inputs with an active voltage between
4.2 and 12 volts. The 24V dc settings respond to inputs with active or
high settings between 10 and 30 volts.

Installing the Module

IMPORTANT

For a 12V dc encoder signal, use the 24V dc jumper
setting.

ATTENTION

If jumpers are not set to match the encoder type, the
module may be damaged.

5V dc

4.2-12V dc

24V dc

10-30V dc

JP6 (Z2)

JP5 (B2)

JP4 (A2)

JP3 (Z1)

JP2 (B1)

JP1 (A1 )

(default)

Jumper Settings

ATTENTION

Disconnect power before attempting to install,
remove, or wire the module.