Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 304)

Index
I-3
configuring (continued)
system memory
module memory, 3-15
non-volatile, 3-11
RAM disk, 3-12
user memory, 3-13
confirming, file passage, 4-5
connecting, control processor,
terminal/personal computer, 3-1
control coprocessor
applications, 1-2
applying power, 2-11
ASCII display functions, CC utility,
5-12
catalog numbers, 1-2
configuring, 3-9
default startup parameters, 3-10
system memory, 3-11
connecting, terminal/personal
computer, 3-1
CSA certification, A-3
direct-connect mode, 1-4
error functions, CC utility, 5-12
hardware overview, 1-3
installing, 2-1
direct-connect mode, 2-7
standalone mode, 2-10
main module, 1-2
memory functions, DTL, 5-5
MSG instructions, 5-8
operating system, 1-7
product compatibility, A-2
product overview, 1-1
product specifications, A-1
program development software, 1-7
programming languages, 1-8
removing
direct-connect mode, 2-11
main module in standalone mode,
2-11
serial expander module, 2-11
serial expander module, 1-2
serial ports, 7-1
standalone mode, 1-4
UL certification, A-4
user interface, 1-6
conversion functions, DTL, 5-4
creating
C test program, 4-1
test directory, command line
interface, 3-9
text file, 3-20
user startup file, 3-19
CSA certification, A-3
D
default startup parameters,
configuring, 3-10
device names, referencing serial ports,
7-4
direct-connect mode
backplane interface
block transfer, 1-5
discrete I/O, 1-5
installing, control coprocessor, 2-7
preparing programs, 5-14
linking API functions to
programs, 5-15
sample BASIC program, 5-17
sample C program, 5-15
removing, control coprocessor, 2-11
discrete I/O
direct-connect mode, 1-5
standalone mode, 1-5
disposing, battery, 2-4
DOS-based personal computer, user
interface, 1-6
DTL functions, 5-2
configuration, 5-3
control coprocessor memory, 5-5
conversion, 5-4
how to use, 5-3
read/write access, 5-3
utility, 5-5
DTL_C_DEFINE, 5-3, B-40
DTL_CLOCK, 5-5, B-43