Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 282)

Using the PCBridge Software
Appendix D
D-4
The L) Load Memory Module option loads an OS-9 memory module
produced by the cross-compiler or cross-assembler. If you select this
option, the prompt is displayed as shown in Figure D.2.
Figure D.2
Load Memory Module
PCBridge Microware’s PC hosted OS-9/680x0 Development System
Enter module name to load:
At the prompt, enter the module name. This module is transferred to the
OS-9 system and loaded into memory. This does not transfer the actual
module file to the disk used by the OS-9 system; it loads the module
directly into OS-9 memory.
Use the O) OS-9 Terminal option to remotely log on to the OS-9
system. The PCBridge software emulates a DEC VT100 terminal. To
access the PCBridge main menu, press
[F1] .
Sending and Receiving Files—Transfer Tags
The PCBridge software supports a method of batching file transfers
to/from the target OS-9 system. This is based on a user file called the
transfer list . The transfer list contains text that tells the PCBridge
software how to do a wide variety of file-transfer operations between the
PC and OS-9. Each directory from which the PCBridge software is
invoked can have its own unique transfer list. The transfer-list file,
TRANSFER.LST, is in the working directory.
The PCBridge software gives you the option of transferring a single file
or using a transfer tag to transfer an associated set of files. If you enter a
transfer tag, the software transfers all of the files associated with that tag.
The PCBridge software supports wildcards for file transfers. If a wildcard
symbol is used anywhere in a file name, all of the corresponding files
are transferred.
Loading Memory Module
Log On Remotely to
OSĆ9 Terminal