Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 264)

API Library of Routines
Appendix B
TAG_WRITE
B-133
Writes data to a user’s TAG memory area.
C Syntax
#include
unsigned TAG_WRITE (tag,offset,size,buffer,timeout)
unsigned tag;
or
char *tag
unsigned offset;
unsigned size;
unsigned char *buffer;
unsigned timeout;
Parameters
tag
Use to access the TAG table. This can be either the symbolic TAG or
the handle returned from a TAG_LINK or TAG_DEFINE call.
offset
A byte offset from the start of the tagged area from where data will
be written.
size
Specifies the number of bytes to write to the tagged area.
buffer
Specifies the buffer to copy the write data write to the tagged area.
timeout
Timeout value in seconds (valid range 0-16383). The function will
timeout unless the TAG can be written before the timeout expires. The
TAG may not be able to be written if another process has the TAG
locked. A value of CC_FOREVER (defined in COPRO.H) will cause
this function to wait indefinitely until the TAG can be written.
Returns
Value Symbolic Name Meaning
0 CC_SUCCESS Operation successful
120 CC_E_BADID TAG define ID out of range
131 CC_E_TOOBIG Data size greater than the maximum allowed
160 CC_E_INV_TO Invalid timeout value
171 CC_E_TIME_LOCKED Did not complete in time, TAG locked
174 CC_E_TAGPEND TAG write is already pending on this TAG
176 CC_E_NOTAG TAG not found
178 CC_E_NOTLOCKER Caller is not the locker of this TAG
189 CC_E_NOACCESS TAG is READ only
TAG_WRITE