Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 284)

Using the PCBridge Software
Appendix D
D-6
Use the T) Modify Transfer List option to create, edit, or view
the current transfer list. See page D-4 for the “Sending and Receiving
Files—Transfer Tags” section. If you select this option, the PCBridge
software invokes your editor on the file TRANSFER.LST in the current
working directory. A transfer list entry consists of:
a tag keyword (TAG) which must start in column one
a user-defined tag name and an optional description of the tag
an associated set of filename and transfer types
Separate entries with one or more spaces. You must specify a file type
after the file name. Valid options are:
File Type Description
Ćt text file
Ćb binary file
Ćl send file to OSĆ9 and load it into memory as an OSĆ9 module
For example, a transfer list (TRANSFER.LST) might look like Figure D.4.
Figure D.4
Modify Transfer List
PCBridge Microware’s PC hosted OS-9/680x0 Development System
files
keyword
user–defined name
optional description
JOE USER’S TRANSFER LIST
TAG dbg_hello debug files for hello world program
hello.c -t hello.stb -b hello.dbg -b
hello -l
TAG src_hello - send hello source only
hello.c -t
TAG test_data - receive test data from target
test*.* -t testbin*.* -b
TAG config - receive config info from target
cfg* -b config.sys -t
Use the U) Modify Build List option to create, edit, or view the
current build list. Select this option to edit the file BUILD.LST in the
current working directory.
A build list consists of:
a tag keyword (TAG) which must start in column one
a user-defined tag name and an optional description of the tag
an associated set of commands to compile/assemble the files
Modify Transfer List
Modify Build List