Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 288)

Using the PCBridge Software
Appendix D
D-10
XCC
The following options are in the cross-compiler executive (XCC):
Option Description
Ćfo Fork the specified string. This option allows you to call the assembler or linker directly.
For example:
xcc Ćqfor68 Ćq file.a Ćo=RELS/file.r"
Ćlo= Options to pass through to the linker. You can use this option to get around the 128Ćcharacter DOS
commandĆlinelimit.
Options to pass through to the linker. You can use this option to get around the 128Ćcharacter DOS
commandĆlinelimit.
For example, rather than typing the names of all files to link, create a file containing the file names
and usea command likethefollowing:
xcc Ćq Ćlo=Ćz=fnames" file.c
Ćpo= Options to pass through to the preĆprocessor. You can use this option to get around the 128
character DOS command line limit.
For example, if you have several Ćv or Ćd options for the preĆprocessor, you can easily exceed 128
characters. Createa filecontaining theĆv and Ćd lines and usea command likethefollowing:
xcc Ćq Ćpo=Ćz=fnames" file.c
CPP
The following option is in the macro preprocessor (CPP):
Option Description
Ćz= Read file names and options from a file. For use with the Ćpo option on XCC. For example:
xcc Ćq Ćpo=Ćz=fnames" file.c
L68
The following option is in the OS-9 linker ( L68):
Option Description
Ćz= Read file names and options from a file. For use with the Ćlo option on XCC. For example:
xcc Ćq Ćlo=Ćz=fnames" file.c