Rockwell Automation 1746-NR8 SLC 500 RTD/Resistance Input Module User Manual - Manual (Page 115)

Publication 1746-UM003A-EN-P
Index iii
R
remote configuration G-3
removable terminal block 1-6
removing the module 2-7
removing the terminal block 2-6
resistance device types
ohmic values 1-5
potentiometers 1-5
resolution 3-6, G-3
routing of wires 2-9
RTD
definition G-3
excitation current
definition and values G-2
RTD Temperature Ranges, Resolution, and Repeatability A-3
S
sampling time G-3
scaled-for-PID 4-6
scaling 4-10
scaling input data G-2
scanning process
scanning cycle 3-10
update time 3-10
self-locking tabs 1-6
specifications A-1
cable A-5
standards
for RTDs A-5
status word G-3
step response 3-5, G-3
system operation 1-7
T
temperature units 4-17
bit description in configuration word 4-17
bit description in status word 4-22
terms G-1
torque 2-9
terminal block screws 2-9
troubleshooting 6-1
contacting Allen-Bradley P-3
flowchart 6-7
LED examination 6-2
turn-on time 3-12
U
under-range error 4-23
fault bit 4-23
update time G-3
channel update time 3-10
module update time 3-10
V
Verification of dynamic configuration change 5-4
W
wiring 2-1
routing of wires 2-9