Rockwell Automation 1794-ID2 U.MNL INCREMENTAL ENCODER - Manual (Page 24)

2–2 How to Install Your Incremental Encoder Module
Publication 1794ĆUM015B-EN-P - May 2001
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as Allen-Bradley publication
1770-4.1, Industrial Automation Wiring and Grounding Guidelines.
Open style devices must be provided with environmental and safety
protection by proper mounting in enclosures designed for specific
application conditions. See NEMA Standards publication 250 and
IEC publication 529, as applicable, for explanations of the degrees of
protection provided by different types of enclosure.
The wiring of the terminal base unit is determined by the current
draw through the terminal base. Make certain that the current draw
does not exceed 10A.
!
ATTENTION: Total current draw through the
terminal base unit is limited to 10A. Separate power
connections may be necessary.
Power Requirements