Rockwell Automation 1734-IT2I Thermocouple and RTD Input Module User Manual - Manual (Page 65)

55 Publication 1734-UM004F-EN-E - December 2012
Appendix
A
Configure Modules in RSLogix 5000 Software
Overview Read this appendix for information about how to configure your modules in
RSLogix 5000 software, including how to complete entries on the following
dialogs.
• Configuration
• Alarm Configuration
• Calibration
The following table lists where to find specific information in this chapter.
Understanding Data,
Connection, and
Communication Formats Before you configure your modules, note the following about Data formats
and Connection types.
• Data format type is Integer.
• Connection types are:
– Data
– Listen Only
Communication formats for adapters are:
• Listen Only - Rack Optimization
• None
• Rack Optimization
Choices for formats for the module depend on the Communication format for
the adapter. See the table for a listing of possible module Connection formats
based on adapter Communication formats. The modules do not support Rack
Topic Page
Understanding Data, Connection, and Communication Formats 55
Configure Your Module 56
Use the Help Button 57
Working with Dialogs 57