Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module User Manual
Page 85
Publication 1756-UM525A-EN-P - June 2003
85
Specifications Appendix A
Radiated RF Immunity
IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 80MHz
to 2000MHz
10V/m with 200Hz 50% Pulse 100%AM at
900Mhz
EFT/B Immunity
IEC 61000-4-4:
±2kV at 5kHz on signal ports
Surge Transient Immunity
IEC 61000-4-5:
+2kV line-earth (CM) on shielded ports
Conducted RF Immunity
IEC 61000-4-6:
10Vrms with 1kHz sine-wave 80%AM from 150kHz
to 80MHz
Enclosure Type Rating
None (open-style)
Certifications
(when product is marked)
UL
UL Listed Industrial Control Equipment
CSA
CSA Certified Process Control Equipment
CSA
CSA Certified Process Control Equipment
for Class I, Division 2 Group A,B,C,D
Hazardous Locations
CE
(5)
European Union 89/336/EEC EMC
Directive, compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab.,
Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
C-Tick
(4)
Australian Radiocommunications Act,
compliant with:
AS/NZS 2064; Industrial Emissions
(1)
This specification represents the maximum LTD input resolution that the 1756-HYD02 module can accept. The
module does not require that you connect an LDT with this level of resolution.
(2)
Maximum wire size requires the extended-depth RTB housing (1756-TBE).
(3)
Use the conductor category information for planning conductor routing as described in the system level
installation manual.
(4)
Refer to Industrial Automation Wiring and Grounding Guidelines, publication number 1770-4.1.
(5)
See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other
certification details.