Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual User Manual
Page 7

Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
v
Table of Contents
Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Common Techniques Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . viii
About the Example Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
System Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Chapter 1
Overview of the 1738
ArmorPOINT I/O EtherNet/IP
Adapter
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adapter Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What the Adapter Does . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Physical Features of Your Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware/Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Adapter Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Set the Chassis Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adapter Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Empty Slots and RIUP Situations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Power Up a System for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Use of the Common Industrial Protocol (CIP) . . . . . . . . . . . . . . . . . . . . . . . 6
Understand the Producer/Consumer Model . . . . . . . . . . . . . . . . . . . . . . . . . 6
Specify the Requested Packet Interval (RPI) . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Support for Rack-optimized and Direct Connections . . . . . . . . . . . . . . . . . 7
Mixing Rack-optimized and Direct Connections . . . . . . . . . . . . . . . . . . 8
Chapter 2
Install Your ArmorPOINT I/O
Adapter
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Mount the Adapter and I/O Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wire an ArmorPOINT I/O Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4