Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 12)

2 Rockwell Automation Publication 1738-UM005A-EN-P - July 2013
Chapter 1 Overview of the 1738 ArmorPOINT I/O EtherNet/IP Adapter
• Half/full duplex 10 Mbit or 100 Mbit operation
• Panel or wall mounting
• Communication to and from other ArmorPOINT I/O modules in the
chassis
• Communication supported by RSLinx software
• IP address assigned via standard BootP or DHCP tools
• I/O configuration via RSLogix 5000 software
• No network scheduling required
• No routing tables required
• Support of connections from multiple controllers simultaneously
You must use RSLogix 5000 to configure these features. For more details on
configuration, see
Configuration Requirements in Chapter 3 .
What the Adapter Does The I/O adapters perform the following primary tasks:
• Control of real-time I/O data (also known as implicit messaging) - the
adapter serves as a bridge between I/O modules and the network
• Support of messaging data for configuration and programming
information (also known as explicit messaging)
L
6
3
EtherNet/IP Network
E
N
B
T
Other
Network
Devices A
E
N
T
POINT
I/O
E
N
B
T
ControlLogix
I/O