Rockwell Automation 1738-AENT, Series B ArmorPOINT I/O Dual Port EtherNet/IP Adapters User Manual - Manual (Page 13)

Rockwell Automation Publication 1738-UM005A-EN-P - July 2013 3
Overview of the 1738 ArmorPOINT I/O EtherNet/IP Adapter Chapter 1
Physical Features of Your
Adapter The 1738 Adapter has the following components:
• One EtherNet/IP Female M12 connector
• Network address Switches
• Mini Style 4-Pin in Male Auxiliary Power Connector
• Status indicators (Module Status; Network Status; POINTBus Status;
Network Activity; System Power; Adapter Power)
Physical Features of the 1738-AENT/B Adapters
Hardware/Software
Compatibility The I/O adapter and the software applications described in this manual are
compatible with the following firmware revisions and
software releases.
Contact Rockwell Automation if you need software or firmware upgrades to use
this equipment
1738-AENT
Series B
EtherNet I/P
Adapter
Status
Network
Activity
Network
Status
PointBus
Status
System
Power
Adapter
Power
X100
X10
X1
conformance tested ™
PWR
P
A
D
D
R
E
S
S
I
M12 Female in
connector
Mini-style 4-pin in
Male Connector
Network Address
Switches
43798
Status indicators
Product Firmware Revision/ Software Release
1738-AENT Series B adapters 4.002 or later
1756-ENBT 4.5 or later
Logix Controller 17 or later
RSLogix 5000 software 17 or later
RSLinx software 2.56 or later