Rockwell Automation 1395 DC Drive, 800-1250 Hp, FRN 5.XX-9.30 - Manual (Page 198)

Chapter 7
Reference Materials
7-13
PARAMETER NAME PARAMETER NO. PAGE REFERENCE
System Inertia 703 5-58
System Reset Select 620 5-36
Strt Taper Speed 665 5-48
Tach Loss CEMF 731 5-63
Tach Loss Vel 732 5-63
Tach Switch Ki 689 5-55
Tach Switch Kp 690 5-55
Tach Switch Select 691 5-56
Tach Switch Tol 688 5-55
Tach Velocity 156 5-30
Torque Command 110 5-21
Torque Mode 625 5-38
Torque Reference 157 5-30
Torque Reference 2 167 5-32
Trend 1 Contig Trigger Swtch 915 5-74
Trend Constant Signed Value 900 – 903 5-70
Trend Constant Logic Value 904 – 907 5-71
Trend Constant Unsigned Value 908 – 909 5-72
Trend Enable Trend 916 (926, 936, 946) 5-74, 5-74
Trend Operand Parameter X 910 (920, 930, 940) 5-72, 5-74
Trend Operand Parameter Y 911 (921, 931, 941) 5-72, 5-74
Trend Operator 912 (922, 932, 942) 5-73, 5-74
Trend Output Transmit Rate 917 (927, 937, 947) 5-74, 5-74
Trend Sampling Rate 913 (923, 933, 943) 5-73, 5-74
Trend Samples After Trigger 914 (924, 934, 944) 5-73, 5-74
Up to Speed Tol 709 5-60
Vel Desired BW 700 5-57
Vel Damp Factor 702 5-58
Velocity Error 124 5-24
Velocity Feedback 106 5-20
Velocity Feed Forward 108 5-21
Velocity Filter Sel 631 5-41
Velocity Indirect 1 163 – 166 5-31 – 5-32
Velocity Max BW 701 5-57
Velocity PI Output 123 5-24
Velocity Ref Fraction 153 5-29
Velocity Ref Whole 154 5-29
Warning Select 632 5-41
Zero Speed Tol 710 5-60
Parameter Reference Listing (Alphabetical)