Rockwell Automation 1395 DC Drive, 800-1250 Hp, FRN 5.XX-9.30 - Manual (Page 161)

Chapter 5
Programming Parameters
5-70
Parameter 844 – SP Indirect 5 [SP Indirect 5]
Internal units : None
Programming Terminal units: None
Minimum Value: –32767
Maximum Value: +32767
Default Value: 0
Description: When programmed, appears as a constant Source
parameter value at parameter 14 and can be linked to a Sink
parameter.
Parameter 900 – Trend Constant Signed Value [Trend Sign Val]
Internal units : None
Programming Terminal units: None
Minimum Value: –32767
Maximum Value: +32767
Default Value: 0
Description: This parameter specifies a signed constant value used
for trend trigger evaluation. This parameter number is entered when
programming Trend Operand Parameter X or Y.
Parameter 901 – Trend Constant Signed Value [Trend Sign Val]
Internal units : None
Programming Terminal units: None
Minimum Value: –32767
Maximum Value: +32767
Default Value: 0
Description: This parameter specifies a signed constant value used
for trend trigger evaluation. This parameter number is entered when
programming Trend Operand Parameter X or Y.
Parameter 902 – Trend Constant Signed Value [Trend Sign Val]
Internal units : None
Programming Terminal units: None
Minimum Value: –32767
Maximum Value: +32767
Default Value: 0
Description: This parameter specifies a signed constant value used
for trend trigger evaluation. This parameter number is entered when
programming Trend Operand Parameter X or Y.
Parameter 903 – Trend Constant Signed Value [Trend Sign Val]
Internal units : None
Programming Terminal units: None
Minimum Value: –32767
Maximum Value: +32767
Default Value: 0
Description: This parameter specifies a signed constant value used
for trend trigger evaluation. This parameter number is entered when
programming Trend Operand Parameter X or Y.