Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 8

8
Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 1
ATTENTION:
An incorrectly applied or installed EtherNet/IP
Communications Auxiliary can result in damage to the components or
reduction in product life. Wiring or application errors (e.g., supplying
incorrect or inadequate supply voltage or operating/storing in excessive
ambient temperatures) may result in malfunction of the product.
ATTENTION:
Only personnel familiar with the EtherNet/IP
Communications Auxiliary and associated machinery should plan to
install, set up, and maintain the system. Failure to comply may result in
personal injury and/or equipment damage.
ATTENTION:
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user may be
required to take adequate measures.
ATTENTION:
To remain compliant with UL/CSA Certifications, the
DeviceNet power supply must meet NEC Class 2 Requirements.