Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 92)

92 Rockwell Automation Publication 193-UM014B-EN-P December 2011
Appendix B
Table 36 - Instance Attributes
Output Assemblies
The following output assembly instances are implemented.
Table 37 - Instance 100
Input Assemblies
Table 38 - Instance 101
# Access Name Type Value Description
3 Get/Set Data Array of UINT — Data produced/consumed by the module
Byte Size Contents
Scan List I/O Size Data to be delivered to the first scan list entry.
Scan List I/O Size Data to be delivered to the second scan list entry.
Scan List I/O Size Data to be delivered to the third scan list entry.
Scan List I/O Size Data to be delivered to the fourth scan list entry.
Scan List I/O Size Data to be delivered to the fifth scan list entry.
Scan List I/O Size Data to be delivered to the sixth scan list entry.
Byte Size Contents
4 Bytes Logix Status Word
2 Bytes DeviceNet Scanner Status (Parameter 1) See Table 9 on page 73
2 Bytes Scan List Entry 1 Status Word (Parameter 2) See Table 10 on page 74
2 Bytes Scan List Entry 2 Status Word (Parameter 3) See Table 11 on page 74
2 Bytes Scan List Entry 3 Status Word (Parameter 4) See Table 12 on page 74
2 Bytes Scan List Entry 4 Status Word (Parameter 5) See Table 13 on page 75
2 Bytes Scan List Entry 5 Status Word (Parameter 6) See Table 14 on page 75
2 Bytes Scan List Entry 6 Status Word (Parameter 7) See Table 15 on page 75
Scan List I/O Size Data to be delivered to the first scan list entry.
Scan List I/O Size Data to be delivered to the second scan list entry.
Scan List I/O Size Data to be delivered to the third scan list entry.
Scan List I/O Size Data to be delivered to the fourth scan list entry.
Scan List I/O Size Data to be delivered to the fifth scan list entry.
Scan List I/O Size Data to be delivered to the sixth scan list entry.
2 Bytes DataLink 1 Data
2 Bytes DataLink 2 Data
2 Bytes
: : : : DataLink 3 Data
: : : :
2 Bytes Data Link 48 Data