E-mail configuration – Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 68

68
Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 8
The first word in the e-mail subject is the device name. If a device name is not
configured, then the product name attribute from the identity object will be used.
E-mail Configuration
To be able to send an e-mail, the IP address ot the hostname of a Simple Mail
Transfer Protocol (SMTP) server must be configured and notifications must be
selected. Follow these steps to configure an e-mail notification.
1.
In the web browser, type the IP address of the EtherNet/IP
Communications Auxiliary in the address bar, then press the enter key on
the keyboard.
2.
Select Administrative Settings E-Mail Configuration. A login window will
appear.
EXAMPLE
E-mail Subject:
193-DNENCATR Comms Aux has detected a fault
E-mail Body:
Fault Status:
Device Name: 193-DNENCATR Comms Aux
Device Description: Motor Starters
Device Location: Bay 6-U29
Contact Info: Contact Person [email protected]