Rockwell Automation 20-750-BNETIP BACnet/IP Option Module - Manual (Page 9)

Rockwell Automation Publication 750COM-UM005B-EN-P - June 2014 9
Preface
This manual provides information about the 20-750-BNETIP BACnet/IP
option module for network communication and how to use the module with
PowerFlex® 750-Series drives.
Conventions Used in This
Manual
The following conventions are used throughout this manual:
• Parameter names are shown in the format Device
Parameter xx - [*] or
Host
Parameter xx - [*] . The xx represents the parameter number. The *
represents the parameter name—for example
Device
Parameter 01 - [Port
Number] .
• The firmware revision number (FRN) is displayed as FRN X.xxx, where
‘
X’ is the major revision number and ‘xxx’ is the minor revision number.
• The dialog box images in this manual resulted from using DriveExplorer
Full software, version 6.02.99. Different versions of the software may have
dialog boxes that vary in appearance, and differences in procedures.
Rockwell Automation
Support
Rockwell Automation offers support services worldwide, with over 75 sales and
support offices, over 500 authorized distributors, and over 250 authorized
systems integrators located through the United States alone. In addition,
Rockwell Automation representatives are in every major country in the world.
Local Product Support
Contact your local Rockwell Automation representative for the following:
• Sales and order support
• Product technical training
• Warranty support
• Support service agreements
Technical Product Assistance
For technical assistance, please review the information in Chapter 5 ,
Troubleshooting, first. If you still have problems, then access the Allen-Bradley
Technical Support website at
http://www.ab.com/support/abdrives or contact
Rockwell Automation.