Configuring ldap authentication on the switch – Blade ICE RACKSWITCH G8124-E User Manual
Page 74
BLADEOS 6.5.2 Application Guide
74 Chapter 4: Authentication & Authorization Protocols
BMD00220, October 2010
Configuring LDAP Authentication on the Switch
1.
Turn LDAP authentication on, then configure the IPv4 addresses of the Primary and Secondary
LDAP servers. Specify the interface port (optional).
2.
Configure the domain name.
3.
You may change the default TCP port number used to listen to LDAP (optional).
The well-known port for LDAP is 389.
4.
Configure the number of retry attempts for contacting the LDAP server, and the timeout period.
>> # ldap-server enable
>> # ldap-server primary-host 10.10.1.1 mgta-port
>> # ldap-server secondary-host 10.10.1.2 data-port
>> # ldap-server domain
>> # ldap-server port
<1-65000>
>> # ldap-server retransmit 3
>> # ldap-server timeout 10