Rockwell Automation 20B PowerFlex 700 Installation Instructions - Frames 0…6 - Manual

Installation Instructions
PowerFlex 700 Adjustable Frequency AC Drive – Frames 0…6
0.37…132 kW (0.5…200 Hp)
This document explains the 5 BASIC STEPS needed to install and perform a
Basic Start-Up of the PowerFlex 700 (Series A or B) AC drive. A Human
Interface Module (HIM) is required to perform the Basic Start-Up routine
covered in this manual.
The information provided is intended for qualified installers only.
Additional Resources These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/literature/ . To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Resource Description
PowerFlex 700 Standard Control User Manual, publication
20B-UM001
Provides detailed information on:
• Parameters and programming
• Faults, alarms, and troubleshooting
PowerFlex 700 Vector Control User Manual (v4.001 & up),
publication
20B-UM002
PowerFlex 700 AC Drive Technical Data, publication
20B-TD001
This publication provides detailed drive specifications,
option specifications and input protection device ratings.
PowerFlex Comm Adapter Manuals, publication
20COMM-UM…
These publications provide information on configuring,
using, and troubleshooting PowerFlex communication
adapters.
PowerFlex 70 and PowerFlex 700 Reference Manual,
publication
PFLEX-RM001
These publications provide detailed application specific
information for programming and configuring the
PowerFlex 700 drive.
PowerFlex 70 Enhanced Control and PowerFlex 700 Vector
Control Reference Manual, publication
PFLEX-RM004
Wiring and Grounding Guidelines for Pulse Width
Modulated (PWM) AC Drives, publication
DRIVES-IN001
Provides basic information needed to properly wire and
ground PWM AC drives.
Safety Guidelines for the Application, Installation and
Maintenance of Solid State Control, publication
SGI-1.1
Provides general guidelines for the application,
installation, and maintenance of solid-state control.
Guarding Against Electrostatic Damage, publication
8000-4.5.2
Provides practices for guarding against Electrostatic
damage (ESD)
Product Certifications website, http://ab.com Provides declarations of conformity, certificates, and
other certification details.