Yamato Scientific CLS600 Cool Line - Manual (Page 43)

40
Maintenance Method
Daily Inspection and Maintenance
Cleaning the filter
The mesh plate is fixed with a magnet. Pull it toward
you.
The bottom of the mesh plate is slipped over pins. Lift
it up and remove it.
The filter cover is fixed with a magnet. Remove it, and
clean the filter or remove dust with a vacuum cleaner.
Deep inside the filter is a condenser fin. Do not touch
it with bare hands because you may get injured.
After cleaning, reversely follow the procedure to
replace the filter cover.
For any questions, contact the dealer who you purchased this unit from, or the nearest sales
division in our company.