Yamato Scientific CLS600 Cool Line - Manual (Page 25)

22
Operation Method
Auto Stop Operation
6. Stop/terminate timer operation
• The operation will be stopped automatically at the setting time.
• The character "End" which tells that the operation is ended will
blink at the setting temperature screen, while AUTO STOP lamp
is on.
• End the timer operation mode by pressing RUN/STOP key for a
second.
• The screen will return to initial setting screen.
7. To suspend auto stop operation
• End timer operation mode by pressing RUN/STOP key for a
second.
• The screen will return to initial setting screen.
To change the setting time…
To change setting time before the timer operation, press TIMER key. It will be in setting mode, and setting
time can be changed. Input time length from the time that it reaches the setting time to the time that it stops
the operation.
To change setting time before the timer operation, press TIMER key. In this case, it is necessary to add
the value of elapsed time to newly adding time.
After that, press RUN/STOP key to confirm the change.