Yamato Scientific CLS600 Cool Line - Manual (Page 22)

19
Operation Method
Quick Auto Stop Operation
4. Stop/terminate timer operation
• The operation will be stopped automatically at the setting time.
• The character "End" which tells that the operation is ended will
blink at the setting temperature screen, while FIXED TEMP. lamp
and AUTO STOP lamp are on.
• End the timer operation mode by pressing RUN/STOP key for a
second.
• The screen will return to initial setting screen.
5. To suspend quick auto stop operation
• End timer operation mode by pressing RUN/STOP key for a
second.
• The screen will return to initial setting screen.
To change the setting time…
To change the setting time during the operation, press TIMER key and set the proper time by ▼▲ key.
In this case, it is necessary to add the value of elapsed time to newly adding time. After a while, the blink
at the setting temperature screen will stop, and the change will be confirmed.