Yamato Scientific CLS600 Cool Line - Manual (Page 16)

13
Operation Method
Operation Mode and Function List
The operation modes of this unit are as follows;
Name Description Page
Fixed Temperature Operation
Set the Temperature by ▼▲ key.
Start/Stop operation by pressing RUN/STOP key.
16
Quick Auto Stop Operation
Used in case that the operation needs to be stopped a few
hours after setting.
The time to the operation stop can be set up by pressing
TIMER key during the Fixed Temp. operation.
The time can be set by ▼▲ key.
Auto Start operation will start by pressing RUN/STOP key.
18
Auto Stop Operation
Used for Auto Stop operation setting at the time of Fixed Temp.
operation setting.
The temperature can be set by ▼▲ key.
Display "AStP" by pressing TIMER key.
The time can be set by ▼▲ key.
Auto Stop operation will start by pressing RUN/STOP key.
20
Auto Start Operation
Used for the operation that starts automatically a few hours
after turning on the POWER key.
The temperature can be set by ▼▲ key.
Display "AStP" by pressing TIMER key.
The time can be set by ▼▲ key.
Auto Start operation will start by pressing RUN/STOP key.
23
NOTE) This unit is impossible to be changed the mode during the operation. If the mode requires to be
changed, stop the operation.