Yamato Scientific CLS600 Cool Line - Manual (Page 15)

12
Description and Function of Each Part
Characters of the Controller
The characters controller shows are as follows:
Character Identifier Name Purpose
AStP Auto Stop Setting Used for setting the auto stop operation.
AStr Auto Start Setting Used for setting the auto start operation.
End Time-up Displayed when timer operation is ended.
cAL
Calibration Offset
Setting
Used for inputting the calibration offset
temperature.
(Refer to Page 26 "Calibration Offset Function".)
LocK Key Lock
Locks the keys on control panel to protect from
unnecessary operation.
(Refer to Page 27 "Lock Function".)
Pon
Power failure
compensation setup
Used for Power failure compensation setup.
(Refer to Page 28 "Power Failure Compensation
Function".)
Accm Addition time
Displays the time that electricity is turned on with
the controller.
(Refer to Page 29 "Addition Time Function".)
™ Refer to Page 15 "Operation Mode, Function Setting Key, and Characters" for operation mode and function
character.