Brother INTELLIFAX 3550 - Manual (Page 87)

7-22 7-22 7-22 7-22 7-22
Ch. 7Ch. 7Ch. 7Ch. 7Ch. 7
3550-US-5.0
NOTE: “TX” means Transmit, “RX” means Receive.
CONTENTS OF THE LIST:
-
DATE & TIME 1
- CALLER ID 2
- NAME (ONLY WHEN AVAILABLE) 3
- COMMENT 4
COMMENTS WILL INCLUDE:
• TX means your machine sent a fax message when it was polled or called.
• RX means your machine received a fax message (except Polling or Call Reservation).
• TEL means you answered a telephone call at your fax machine, external TAD or external phone.
• BLANK means the call was not answered or you answered on an extension phone.
F) RECEIVE PASSWORD F) RECEIVE PASSWORD F) RECEIVE PASSWORD F) RECEIVE PASSWORD F) RECEIVE PASSWORD
If you set this function to ON, you can prevent reception of “junk faxes” that can interfere with
your daily operations. However, then your machine will receive only faxes from sending machines
whose fax number is registered as one of your One-Touch numbers. (Your machine compares the
last four digits of the sending fax machine’s number to the fax numbers stored in your One-Touch
keys.)
Turning Receive Password ON or OFF Turning Receive Password ON or OFF Turning Receive Password ON or OFF Turning Receive Password ON or OFF Turning Receive Password ON or OFF
You can set receive password status to ON or OFF.
KEYS TO PRESS THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 7 1 5 : 2 5
1 . T E M P . S E T T I N G S
7 . S E T U P S Y S T E M
7 . S E T P A S S W O R D
R X P A S S W O R D : O F F
SELECT { } & SET
R X P A S S W O R D : O N
1. Press Function .
2. Press 7 .
3. Press 7 .
4. Press Z (left arrow) or X (right
arrow) to choose ON or OFF.
Example: ON.
5. Press Set or wait for two seconds .
6. Press Stop to exit.
1 . S E T P A S S W O R D
RECEIVING FAXES AND OTHER CALLS
CALLER ID