Brother INTELLIFAX 3550 User Manual

Page 27

3-3

HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY

3550-US-5.0

Ch. 3Ch. 3Ch. 3Ch. 3Ch. 3

There are three types of contrast settings.
Usually the AUTO setting is acceptable. But
if you want to send or copy an especially light
or dark document, you should change this
setting.
AUTO: Default setting is AUTO. Contrast

setting always reverts to AUTO after
one transmission.

S. LIGHT: To send very light documents.
S. DARK: To send very dark documents.

If you need to send a set of originals at
various resolutions, this function will allow
you to set the required resolution page by
page. (If all documents are the same
resolution, use the Resolution key. See page
2-5 #21.)
STANDARD/FINE/S. FINE/PHOTO

If you have trouble when sending overseas,
you may want to set OVERSEAS MODE to
ON.
ON/OFF

An automatic Cover Page will allow you to
send details of who the fax is going to, who it
is from and when it was sent. ON/OFF

If you wish to cancel a job that has been set
with the timer, a polled job etc., use this
function.

You can print several different lists and
reports, which are available under function
item 3. PRINT REPORTS.

If you register names and numbers on One-
Touch dial keys, you can dial a number
automatically just by pressing a One-Touch
key. (Max. of 40 locations)

If you register names and numbers as Speed-
Dial numbers, you can dial a number
automatically just by pressing the Speed-
Dial key and a two-digit number. (Max. of
100 locations)

This is used for setting up a group number
used for broadcasting.

Page

Level one

function

Factory

setting

Level two

function

Explanation of Options

3. SETUP

GROUPS

1. ONE-TOUCH