Brother INTELLIFAX 3550 - Manual (Page 49)

6 - 5
3550-US-5.0
Ch.
6
THE DISPLAY WILL SHOW: KEYS TO PRESS
S E N D I N G
2. Enter a fax number.
Example: One-Touch dialing.
3. Press Start .
Sending a Fax Manually
1. Insert the documents face down
into the feeder.
2. Pick up the handset or press Hook
and listen for the dial tone.
3. Enter the fax number.
You can use manual dialing, One-Touch
dialing, Speed Dialing, or Tel-Index.
4. When you hear a fax tone, press
Start .
Your fax machine will begin sending the
documents.
5. Return the handset to its cradle, if
you did not use Hook .
Automatic and Manual Redialing
If a number you have dialed is busy or your call did not go through for some other reason, you can
redial that number. There are two ways to redial: “automatic” and “manual.” Automatic redialing
can be used only for faxes that were sent using automatic transmission—not for telephone calls.
The fax machine automatically will redial the number 3 times at 5 minute intervals before giving
up. When you press the Redial/Pause key (manual redialing), the fax machine will redial the
last number that was dialed.
N J O F F I C E
D I A L I N G
SENDING P.01
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
FAX: NO. & START
C O P Y : P R E S S C O P Y
ENTER FAX NO.
P R E S S S T A R T K E Y
N J O F F I C E
BASIC FAX TRANSMISSIONS
SENDING FAXES