Brother INTELLIFAX 3550 - Manual (Page 54)

6 - 1 0
3550-US-5.0
3. Enter the fax number. (Or enter a
series of numbers if you are
broadcasting.)
4. Press Start to start scanning
documents.
5. Insert “Document B” within 30
seconds after “Document A” has
been scanned. (If you wait more
than 30 seconds to scan another
document, the machine will begin
to send document “A”.) Repeat Step
2, 3, 4, for document “B”.
6. Repeat Steps 1, 2, 3, 4 for document
“C”.
7. After 30 seconds, your fax machine
will start sending the documents
in scanned order.
MULTI TX 100%
0 9 / 1 2 / 1 9 9 6 1 5 : 2 7
ENTER FAX NO.
P R E S S S T A R T K E Y
N J O F F I C E
Interrupting the Timer and Polled Job
You can send a fax without canceling the Timer (see page 6-7~8) or Polled Waiting with
documents in the feeder (see page 9-2~3) by “interrupting” it. When you interrupt the Timer to
send a “new” set of documents, the fax machine does not automatically redial the number if it was
busy. Also, you can not use the function mode if you have interrupted the Timer or Polled Waiting.
Example: TIMER WAITING with a document in the feeder.
After scanning documents, your fax machine will start sending them in scanned order.
SENDING FAXES
ADVANCED FAX TRANSMISSIONS
0 . I N T E R R U P T
T I M E R W A I T I N G
1 . T E M P . S E T T I N G S
KEYS TO PRESS THE DISPLAY WILL SHOW:
R E M O V E D O C U M E N T
I N S E R T D O C U M E N T
1. Press Function .
2. Press 0 .
3. Wait for two seconds.
4. Remove documents from the fax
machine.
5. Place the “new” documents into the
feeder.
6. Enter the new fax number for the
documents you are sending now,
then press Start .
D I A L I N G
SENDING P.01
FAX OR COPY
FUNC 0 TO RESET
D I A L I N G
MULTI TX 70%