Brother INTELLIFAX 3550 - Manual (Page 53)

6 - 9
3550-US-5.0
Ch.
6
ADVANCED FAX TRANSMISSIONS
SENDING FAXES
1. Insert the documents into the
feeder.
2. Press Super Q.Scan .
3. Enter the One-Touch, Speed-
Dial, or group number, one after
the other.
Example: Group number.
4. Press Start and the fax machine
will read the documents into
memory, and then start sending
faxes to all the numbers you
entered.
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
THE DISPLAY WILL SHOW: KEYS TO PRESS
MEMORY 100%
D I A L I N G
SENDING P.01
A L L B R O T H E R
FAX: NO. & START
C O P Y : P R E S S C O P Y
MEMORY 100%
ENTER FAX NO.
Sending by Multiple Transmissions
Use this function to send several different faxes to several distinations at once. For example, you
can automatically fax “Document A” to one destination and “Document B” to another destination.
This is not to be confused with Broadcasting, which is sending the same document to many
destinations.
If you wish, you can combine this function with broadcasting so you can fax different documents
to different lists of people at the same time. To do this, store various sets of documents in memory.
Then, for example, you can automatically fax “Document A” to one list of people and “Document
B” to another list of people. You can preset 3 different documents (including timer transmission)
in memory; if you set one timer transmission, multiple transmissions are available for two other
destination,
If you press only Super Q.Scan instead of Shift + Super Q.Scan for the last document, your fax
machine will start dialing without waiting for 30 seconds.
THE DISPLAY WILL SHOW: KEYS TO PRESS
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
FAX: NO. & START
C O P Y : P R E S S C O P Y
MULTI TX 100%
ENTER FAX NO.
1. Insert “Document A” into the
feeder.
2. Press Shift + Super Q.Scan
together to send by multiple
transmission.
The display shows remaining memory.