beautypg.com

How to use an external tad with the fax -13, Connecting an external tad to the unit -13, Receiving faxes and other calls – Brother INTELLIFAX 3550 User Manual

Page 78

background image

7-13

7-13

7-13

7-13

7-13

3550-US-5.0

LINE

EXT.

NO !

TAD

TAD

Connecting an External TAD to the Unit

Connecting an External TAD to the Unit

Connecting an External TAD to the Unit

Connecting an External TAD to the Unit

Connecting an External TAD to the Unit

You may connect an external TAD to your fax machine, as shown below. Use the
“EXT.” jack on your fax machine.

FOR YOUR INFORMATION

----- Do not connect a TAD elsewhere on the

Do not connect a TAD elsewhere on the

Do not connect a TAD elsewhere on the

Do not connect a TAD elsewhere on the

Do not connect a TAD elsewhere on the
s a m e p h o n e l i n e . T h i s w i l l c a u s e

s a m e p h o n e l i n e . T h i s w i l l c a u s e

s a m e p h o n e l i n e . T h i s w i l l c a u s e

s a m e p h o n e l i n e . T h i s w i l l c a u s e

s a m e p h o n e l i n e . T h i s w i l l c a u s e
problems because your fax machine and

problems because your fax machine and

problems because your fax machine and

problems because your fax machine and

problems because your fax machine and
TAD will both try to control the line.

TAD will both try to control the line.

TAD will both try to control the line.

TAD will both try to control the line.

TAD will both try to control the line.

C)

C)

C)

C)

C) CONNECTING A TELEPHONE ANSWERING DEVICE

CONNECTING A TELEPHONE ANSWERING DEVICE

CONNECTING A TELEPHONE ANSWERING DEVICE

CONNECTING A TELEPHONE ANSWERING DEVICE

CONNECTING A TELEPHONE ANSWERING DEVICE
(TAD)

(TAD)

(TAD)

(TAD)

(TAD)

How to Use an External TAD with the Fax

How to Use an External TAD with the Fax

How to Use an External TAD with the Fax

How to Use an External TAD with the Fax

How to Use an External TAD with the Fax

When you have a Telephone Answering Device on the fax phone line, the TAD will answer all the
incoming calls. Your Brother fax machine will listen in on the line for fax CNG tones. If it hears
them, it will take over the call and receive the fax message. If it does not hear fax tones, it will
let the TAD continue playing the outgoing message so the caller can leave a voice message.

The TAD must answer within 4 rings (2 rings are recommended). The fax machine can not hear
the CNG calling tones until the TAD answers the call. When the Ring Delay is set for 4 rings, only
8-10 seconds of CNG calling tones are left for the “handshake”. So you must strictly follow the
instructions for recording your OGM.

You must erase the incoming messages frequently on your TAD. When the TAD’s memory is full
it will not answer any incoming calls (fax or voice).

Set your fax machine’s answer mode to TAD (Fax and F/T lights on).

CONNECTING A TELEPHONE ANSWERING DEVICE (TAD)

RECEIVING FAXES AND OTHER CALLS