SATEC BFM136 - Manual (Page 41)

‎Chapter 4 PAS Application Software Changing Port Settings
BFM136 Branch Feeder Monitor 41
Configuring Wireless RF Connections
To enter the Setup dialog, select the site from the list box on the PAS
toolbar, select Communications Setup from the Meter Setup menu, and then
click on the RF Modem Setup tab.
The following table lists available RF modem options.
Label Options Default Description
MAC Net ID 0-255 0 MAC layer network ID
MAC Node ID 1-247 1 MAC layer node ID
Network Net ID 0-255 0 Network cluster ID
Network Node ID 1-247 1 Network layer node ID
Node Type RN+, RN-,
RFD
RN+ Node router type
RF Channel 907 MHz,
910 MHz,
912 MHz,
915 MHz,
917 MHz,
920 MHz,
922 MHz 915 MHz RF channel frequency
RF Power 0-255 255 RF send power
NOTES:
1. Set the RF channel frequency and the MAC Network ID the same as
you selected in the ETC2002 network router.
2. Set the Network Layer Net ID the same as the MAC Network ID.
Configuring eXpertPower Client
The BFM136 has an embedded eXpertPower TM client that provides
communications with the eXpertPower TM server – the SATEC proprietary
Internet services. Connections to the eXpertPower TM server are handled on a
periodic basis.