MacDon R80 Rotary Disc Pull-Type Windrower - Manual (Page 31)

OPERATION
Form # 169053
29
Model Year - 2009
6.6 BREAK-IN PERIOD
a. After attaching mower conditioner to tractor for
the first time, operate the machine slowly for 5
minutes, watching and listening FROM THE
TRACTOR SEAT for binding or interfering parts.
NOTE
Until you become familiar with the sound
and feel of your new mower conditioner,
be extra alert and attentive.
CAUTION
Before investigating an unusual sound or
attempting to correct a problem, shut off
tractor, engage parking brake and remove
key.
b. Perform the items specified in to paragraph
7.13.1 Break-In Inspection Requirements.
6.7 PRE-SEASON CHECK
Perform the following the beginning of each
operating season:
CAUTION
• Review the Operator's Manual to refresh
your memory on safety and operating
recommendations.
• Review all safety signs and other decals
on the mower conditioner and note
hazard areas.
• Be sure all shields and guards are
properly installed and secured. Never
alter or remove safety equipment.
• Be sure you understand and have
practiced safe use of all controls. Know
the capacity and operating
characteristics of the machine.
• Check the first aid kit and fire
extinguisher. Know where they are and
how to use them.
a. Check tension on conditioner drive belt and
adjust if required. Refer to Section 7.9.5
Conditioner Drive Belt.
b. Check tension on hourglass deflector drive belts
and adjust if required. Refer to Section 7.9.10
Hourglass Deflector Drive Belts – 16 Ft.
c. Lubricate machine completely. Refer to Section
7.7 Lubrication.
d. Check tire pressure and adjust as required. See
Section 7.12.3 Tire Inflation.
e. Perform all annual maintenance. See Section
7.13 Maintenance Schedule.
6.8 DAILY START-UP CHECK
Do the following each day before start-up:
CAUTION
• Be sure tractor and mower conditioner
are properly attached, all controls are in
neutral and tractor brake is engaged.
• Clear the area of other persons, pets etc.
Keep children away from machinery.
Walk around the mower conditioner to be
sure no one is under, on or close to it.
• Wear close fitting clothing and protective
shoes with slip resistant soles.
• Remove foreign objects from the
machine and surrounding area.
• As well, carry with you any protective
clothing and personal safety devices that
COULD be necessary through the day.
Don't take chances.
• You may need:
- a hard hat
- protective glasses or goggles
- heavy gloves
- respirator or filter mask
- wet weather gear
• Protect against noise. Wear
a suitable hearing protective
device such as ear muffs or
ear plugs to protect against
objectionable or
uncomfortable loud noises.
a. Check the machine for leaks or any parts that
are missing, broken, or not working correctly.
NOTE:
Use proper procedure when searching for
pressurized fluid leaks. Refer to Section
7.10 Hydraulic Drive System.
b. Clean all lights and reflective surfaces on the
machine. Check lights for proper operation.
c. Perform all Daily maintenance. Refer to Section
7.13, Maintenance Schedule.
(continued next page)