MacDon D65 SP DHOM - Manual (Page 85)

OPERATION
Removing Crop Divider Rods
To remove divider rods, follow these steps:
1. Loosen bolt (B) and remove rod (A).
Figure 4.56: Crop Divider Rod
2. Store both rods on the inboard side of the
right endsheet.
Figure 4.57: Stored Divider Rod
Using Rice Dividers
Optional special rice dividers can be installed and used
when required. Refer to
8.4.13 Rice Divider Rods, page
269 .
The installation and removal procedures are the same as
for the standard crop dividers.
Figure 4.58: Divider Rod for Rice
169899 73 Revision A