Removing drive cover, Loosening drive chain, Disconnecting the reel drive method – MacDon D65 SP DHOM User Manual

Page 246

Removing Drive Cover

Remove the six bolts (B) that secure the upper cover
(A) to the reel drive and to the lower cover (C).

NOTE:
The lower cover (C) may also be removed by
taking off the three bolts (D).

Figure 6.238: Double Reel

Loosening Drive Chain

Loosen nuts (A). Slide motor (B) and motor mount (C)
down towards reel shaft.

Figure 6.239: Reel Drive

Disconnecting the Reel Drive Method

Support inboard end of right reel with a front end loader
and nylon slings (or equivalent setup).

NOTE:
To avoid damaging or denting center tube, support reel
as close as possible to the end disc.

Figure 6.240: Supporting Reel

169899

234

Revision A