MacDon D65 SP DHOM - Manual (Page 106)

OPERATION
5. Align lift hook (A) with lug (B) and lift wheel assembly
to engage pin in hook (A). Ensure latch (C) is engaged.
6. Install clevis pin (D) and secure with hairpin to center
of axle.
Figure 4.78: Front (Left) Wheels
7. Lift wheel assembly to desired height and slide
linkage (A) into appropriate slot in vertical support.
8. Push down on handle (B) to lock.
Figure 4.79: Front (Left) Wheels
Moving Rear (Right) Wheels into Field Position
To move the rear (right) transport wheels into field position, follow these steps.
1. Pull pin (A) on the left hand wheel behind the header.
Swivel wheel clockwise and lock with pin (A).
Figure 4.80: Left Rear Wheel
169899 94 Revision A