Starting – Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI System Hardware & BigComm Software User Manual
Page 76
BigStuff3 Pro SEFI System
Version 2.1 – February 2011
69
Next, depress and hold the keyboard “Shift” key. Now, use the arrow keys, to maneuver through the
cells to be changed. As the cells are being selected they will become highlighted. Once the desired
cell range has been highlighted, release the “Shift” key. Depress the “Page Up” key to increase the cell
values and the “Page Down” key to decrease the cell values. The cell values will increase or decrease
by a value of one (1) for every keystroke. To exit this mode, depress any one of the arrow keys.
The illustration below shows the areas of the base fuel map that the ECU accesses under different
driving conditions.
Hint: Use the 02% Correction feedback in the Dash to help calibrate the Fuel table VE values.
Note: Be sure the ECU is properly configured and the Base Fuel and Spark Tables are
calibrated before configuring and calibrating any of the following engine operating
parameters
.
34. STARTING
The “Starting” drop-down selections allow the user to calibrate parameters associated with starting
(cranking) and running the engine for a short period of time (temperature dependent) after the engine is
initially started.
The BigComm software allows the user to configure the Load (MAP)
and RPM axes allowing for a larger number of cells (map area) to be
used for the fuel and spark tables.
MAP (Kpa) - Engine Load
203
80
80
80
80
80
80
80
80
80
87
90
91
91
91
91
91
176
80
80
80
80
80
80
80
87
87
90
90
90
95
95
95
91
150
80
80
80
80
80
80
80
83
83
87
87
90
95
95
95
91
125
80
80
80
80
80
80
80
80
82
82
84
90
91
91
91
91
111
80
80
80
80
80
80
80
8
80
80
80
80
90
90
90
90
100
80
80
80
80
80
80
80
80
75
75
80
8
87
87
87
87
90
77
77
80
80
80
80
75
70
70
70
70
77
84
82
82
82
81
77
77
77
80
80
70
70
70
70
70
70
70
82
82
82
82
70
60
60
77
75
70
70
70
70
66
66
66
66
70
70
70
70
64
50
50
60
70
66
66
66
60
60
60
60
60
66
66
66
66
60
40
40
55
60
60
66
66
56
59
50
59
59
59
59
59
59
56
36
36
46
50
50
55
55
56
56
50
55
55
5
55
55
55
50
35
35
45
50
50
50
55
50
50
50
50
50
50
50
50
50
45
31
31
40
40
44
44
48
48
48
48
48
48
48
48
48
48
41
25
25
3
35
38
40
44
44
44
44
44
48
48
48
48
48
28
25
25
28
33
35
40
40
40
40
40
44
48
48
48
48
48
600
800
1,000
1,150
1,200
1,500
1,800
2,000
2,400
2,800
3,200
3,600
4,000
5,000
6,000
7,000
RPM