beautypg.com
1-11
Continued from the previous step
↓
Protocol LPD
6. Press the < > button once.
1. Press the
button once. XXX indicates the protocol name.
Protocol Port9100
XXX Disabled *
7. Press the < > button once.
2. Press the < > button once.
Protocol IPP
XXX Enabled
8. Press the < > button once.
Protocol NetBIOS TCP/IP
9. Press the < > button once.
3. Press the
button once. ‘Reboot system to take effect’ appears for 3 seconds, then following screen appears.
Protocol NetBEUI
XXX Enabled *
10. Press the < > button once.
Protocol NetWare
11. Press the < > button once.
Protocol AppleTalk
4. To start other protocols, press
or the < > button once and continue to the next step.
To finish the setting procedure, go to step 12.
12. Restart the printer.
Starting protocols
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500
