Brother HL-4000CN - Manual (Page 35)

1-8
Setting the Gateway Address
Continued from the previous step
↓
TCP/IP
Subnet Mask
↓ 21. Press the < > button once.
TCP/IP
Gateway Address
↓ 22. Press the
Gateway Address
000.000.000.000*
↓
23. Set the gateway address in the same way as the IP
address. To set values with the < > or < > buttons,
you can hold down the button to change the value
sequentially.
Gateway Address
192.168.001.254*
24. At this point, restart the printer.
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500