Brother HL-4000CN - Manual (Page 112)

6-4
Symptom Possible Cause Action
Is the printer properly configured for
use through a network? (When on a
network.) Print the printer configuration list to
check the network settings.
Correct any inappropriate settings.
See “Network User's Guide”
The network has a problem. (When
on a network). Check that the printer is on and
execute the print command from the
computer one more time.
If the problem persists, consult your
system administrator.
(Continued from previous
page)
The Print Ready lamp is
not on or flashing after
executing the print
command
Is the printer off? Press the [I] on the power switch to
turn on the printer.
See 3.2.1 “Turn On the Printer”
Printouts are not output
from the Printer even
though the Print Ready
lamp is on or flashing There may be data remaining in the
printer. Cancel printing or force the remaining
data to be printed out.
See “Network User's Guide”
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500