Brother HL-4000CN - Manual (Page 128)

6-20
Message Meaning and Action
Reinsert
Transfer Roll The transfer roll cartridge is not inserted in the printer or the
cartridge is set improperly.
Action:
Push the transfer roll cartridge all the way into the printer.
See 8.3.2 “Replacing the Transfer Roll Cartridge”
Replace Print
Head Cartridge
The print head cartridge needs to be replaced.
Action:
Replace the print head cartridge.
See 8.2.2 “Replacing the Print Head Cartridge”
Set Print Head
Cartridge The print head cartridge is not inserted in the printer or the
cartridge is set improperly.
Action:
Push the print head cartridge all the way into the printer.
See 8.2.2 “Replacing the Print Head Cartridge”
No Paper in
Tray1 There is no paper in tray 1.
Action:
Load paper into paper tray 1.
See 4.2.1 “Load Paper in the Paper Tray”
Load xxxx
in N Paper size xxxx is not loaded in tray N or is different from that
specified on the computer.
Action:
Load paper xxxx into tray N. If the computer settings are
incorrect, cancel printing.
Check the following settings on your computer, reconfigure any
that are incorrect, and reprint.
• Is the correct paper tray specified?
• Is the correct paper size specified?
See 4.2.1 “Load Paper in the Paper Tray”
See 3.5.2 “Cancel Printing at the Control Panel”
Check Paper
in N Paper is not properly loaded in tray N or is different from that
specified on the computer.
Action:
Pull out tray N and check the paper. If the computer settings are
incorrect, cancel printing.
Check the following settings on your computer, reconfigure any
that are incorrect, and reprint.
See 4.2.1 “Load Paper in the Paper Tray”
See 3.5.2 “Cancel Printing at the Control Panel”
“N” is a paper tray.
“xxxx” represents the paper size and orientation.
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500