Brother HL-4000CN - Manual (Page 142)

7-8
Paper jams around the fuser cartridge:
Follow the procedure below to remove the jammed paper.
1.
Push up button ‘B’ (1) and fully open
the front cover (2).
2.
Open the levers at the ends of the
fuser cartridge and remove the
jammed paper.
If the paper is torn, remove any scraps
of paper remaining inside the printer.
Look
2
During operation, the fuser unit
(heater) becomes very hot. To prevent
burns, do not touch it with your bare
hands.
3.
Be sure to close the levers at the ends
of the fuser cartridge after removing
the jammed paper.
4.
Close the front cover.
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500