Brother HL-4000CN - Manual (Page 32)

1-5
Continued from the previous page.
↓
TCP/IP
Setup IP Address
↓ 6. Press the
Setup IP Address
DHCP *
The value currently set has a '*' displayed next to it.
↓ 7. Press the < > button once.
Setup IP Address
Panel *
↓ 8. Press the button once.
Reboot system
To take effect
↓
3 seconds later, the following screen appears.
Setup IP Address
Panel *
When the value is set, a '*' appears next to it.
↓
9. Press the or < > button once.
The lower line of the screen returns to the ‘Setup IP
Address’.
Look
1
Only restart the printer after setting the gateway
address at the last step. Continue to the next step
without restarting the printer.
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500