Brother HL-4000CN - Manual (Page 100)

5-9
Job Timeout
The job timeout function causes the printer to stop processing print data when it
takes more than a certain amount of time for the remaining data to be received by
the printer. When a job timeout occurs, the printer only prints the data it received up
to the timeout.
• 5 to 300 seconds (default: 30 seconds)
Set the job timeout between 5 and 300 seconds.
• OFF
Deactivates the job timeout function.
Panel Language
Use this to set what language appears on the control panel.
Auto Log Print
Set this to print logs automatically.
Look
1
You cannot change this setting while the printer is processing print data.
✏ Note
Use the ‘4 Report/List’ menu to print logs.
• No (default)
The printer does not print logs automatically.
• Yes
The printer automatically prints a log after 22 print jobs.
ID Print
Use this to print the user ID in a particular location.
• OFF (default)
• Upper Left
• Upper Right
• Lower Left
• Lower Right
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500