Memmert HPP 108/749 Constant climate chamber (Generation 2003) - Manual (Page 8)

8
Safety regulations
1.5 Changes and conversions
No independent conversions or alterations may be made to the constant climate chamber. No
parts may be added or inserted which have not been approved by the manufacturer.
Independent conversions or alterations result in the EC declaration of conformity (see page
13 ) losing its validity, and the constant climate chamber may no longer be operated.
The manufaturer is not liable for any damage, danger or injuries that result from independent
conversions or alterations, or from non-observation of the regulations in this manual.
1.6 Behaviour in case of malfunctions and irregularities
The constant climate chamber may only be used when in a flawless condition. If you as the
opertor notice irregularities, malfunctions or damage, immediately put the constant climate
chamber out of service and inform your superiors.
You can find information on eliminating malfunctions from page 39 .
1.7 Switching off the constant climate chamber in an emergency
Push main switch on front side of
appliance ( Fig. 1 ). This causes the constant
climate chamber to switch off.
Fig. 1
Switch off constant climate chamber by
pressing main switch