Memmert HPP 108/749 Constant climate chamber (Generation 2003) - Manual (Page 41)

41
Advanced functions
7. Advanced functions
7.1 Printer
The constant climate chamber is equipped with a parallel printer port as standard, just as used
in computers.
A standard PCL3-compatible inkjet printer which has a parallel port interface (e.g. HP DeskJet
5550 or HP DeskJet 9xx) can be connected to the printer port on the rear of the appliance (see
page 10).
Make sure that a shielded interface cable is used. The shielding must be connected to the plug
casing.
The controller has an internal log memory (see page 52 ). The log data can be printed out in
this mode via the connected printer.
If a colour printer is connected, the various graphs are printed out in colour.
On a printout, the GLP header is also printed automatically, and contains the following details:
► Date of printout
► Period of log
► Consecutive page numbers
► Serial numbers and appliance name
By turning the push/turn control and holding down the SET key, the following parameters can
be selected and altered one after another, as described in the chapter " Basic information on
operation " on page 23 :
Querying the date of the first print page
Querying the date of the last print page
Starting graphical printout
Printing programme and configuration page
Leaving the print menu and returning to the main
menu
7.2 Basic appliance settings (Setup)
In this operating mode, the basic settings
for the appliance can be made.
By turning the push/turn control, the following
parameters can be selected and altered while the SET key is held down, as described in the
chapter " Basic information on operation " on page 23 :
Clock time in 24 hr. format
Conversion to summer time is not automatic, but must
be done manually.
PRINT SETUP