Memmert HPP 108/749 Constant climate chamber (Generation 2003) - Manual (Page 38)

38
Operation and control
5.6.8 Operation with computer/ laptop (optional)
The constant climate chamber can optionally be used, controlled and programmed with a
computer/laptop. It has corresponding communication interfaces on the rear side for this
purpose (see page 50 ).
The control of the appliance with the “Celsius“ software is described in its own
separate manual.
5.7 Ending operation
1. Switch off appliance. To do this, press the
main switch on the operating panel so
that it clicks home into the appliance (see
Fig. 22 ).
2. Open the door
3. Remove the chamber load.
4. Check the freshwater tank and fill up if
necessary (see page 21 ). Fig. 22 Switching off the constant climate
chamber