Memmert HPP 108/749 Constant climate chamber (Generation 2003) - Manual (Page 29)

29
Operation and control
2. Switch on Mo-Fr at 07.30
Turning the push/turn control to the left and select “Mo-
Fr on“ (group working days).
Hold down the SET key and set the desired switch-on
time with the push/turn switch to 7:30.
Sa Su
off
Mo Tu We Th Fr
h
on
3. Switch off Mo–Fr at 18.00
Select “Mo–Fr off“ (group working days) with the push/
turn control.
Hold down the SET key and set the desired switch-off
time with the push/turn switch to 18:00.
Sa Su
on
Mo Tu We Th Fr
h
off
4. Switch on Saturday at 10:00
With the push/turn control, select the “Sat on” icon.
Hold down the SET key and set the desired switch-on
time with the push-turn switch to 10:00.
Mo Tu We Th Fr Su
off
Sa
h
on
5. Switch off on Sa at 14:00
With the push/turn control, select the “Sat off” anwäh-
len.
Hold down the SET key and set the desired switch-off
time with the push-turn switch to 14:00.
Mo Tu We Th Fr Su
on
Sa
h
off
5.6.5 Programme mode
In this operating mode, up to 40 freely
progammable sequences (ramps) can be set with
various combinations of temperature and humidity,
which the constant climate chamber then processes automatically one after another.
Not all combinations of temperature and humidity are possible (see also page 10 ).
Setting the programming operating mode
1. Press the SET key and keep it held down.
2. Select the programming mode with the push/turn
control, while the SET key is held down.
3. Select the EDIT function with the push-turn
control.
PRINT SETUP
PRINT SETUP