Memmert HPP 108/749 Constant climate chamber (Generation 2003) - Manual (Page 55)

55
Advanced functions
7.6.6 User ID card (optionally available as an accessory)
The device number of the appliance and an
unique user number are stored in encrypted
form on the User-ID card ( Fig. 34 ). The User-ID
card therefore works only in the appliance with
the corresponding serial number.
Every login process with the User-ID card is
logged in the internal Flash memory of the
controller.
If the User-ID card has been inserted, the menu
item ID-LOCK also appears in the
SETUP
menu (see
" Basic appliance settings (Setup) ” from page 41 ).
If the setting is set to ON, the constant climate
chamber is locked against all alterations once
the chip card is removed.
The lock via the User-ID card is displayed via the flashing key icon
on the operating
panel (see page 9 ).
If the constant climate chamber is locked via the User-ID card, no programme operation
with the MEMoryCard XL is possible, since this card could be removed at any time and
modified externally.
access
authority
card
Name:
ID:
_____________________
_____________________
Fig. 34 User ID Card